Knife Gate Valves

EBRO ARMATUREN TV Knife Gate Valves Knife Gate Valve Stafsjö’s knife gate valve TV is used as an isolation valve for a transmitter or sensor on a tank for which a short face-to-face length is required.

EBRO ARMATUREN SLX Knife Gate Valves High pressure knife gate valve Stafsjö’s knife gate valves SLH and SLX are designed for the most demanding high pressure applications with slurry and other abrasive media where operation reliability and low life cycle cost are emphasized. The SLH is designed for pressure up 20 bar/290 psi while the SLX is designed for 50 bar/720 psi.

EBRO ARMATUREN SLV Knife Gate Valves Knife Gate Valve for abrasive slurry. Stafsjö’s knife gate valves SLV and SLF are particularly suitable for abrasive and demanding slurry where operation reliability and low life cycle cost are emphasized. The SLV is a lugged version while the SLF is fully flanged and especially suitable on old non-centred pipes or low pressure applications.

EBRO ARMATUREN SLV Knife Gate Valves Knife Gate Valve for abrasive slurry. Stafsjö’s knife gate valves SLV and SLF are particularly suitable for abrasive and demanding slurry where operation reliability and low life cycle cost are emphasized. The SLV is a lugged version while the SLF is fully flanged and especially suitable on old non-centred pipes or low pressure applications.

EBRO ARMATUREN D2G Knife Gate Valves Knife Gate Valve with two plates. Stafsjö’s knife gate valve D2G is a bi-directional tight valve with full bore. The valve is equipped with two hard chromed gates that works towards each other in the bore, which gives an extremely fast operation. This shut-off performance along with its flow characteristics makes it suitable for contaminated media or reject handling. The valve should be mounted only in a vertical pipe line.

EBRO ARMATUREN JT Knife Gate Valves Knife Gate Valve This complete Junk Trap is designed for really tough process conditions handling difficult and abrasive media. The JT is specially designed to minimize turbulence, erosive wear, and build-up of solids and reject material.

EBRO ARMATUREN RKO Knife Gate Valves Knife Gate Valves for high pressure applications. Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.

EBRO ARMATUREN HX Knife Gate Valves Knife Gate Valves for high pressure applications. Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.

EBRO ARMATUREN HPT Knife Gate Valves Knife Gate Valves for high pressure applications. Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.

EBRO ARMATUREN HP Knife Gate Valves Knife Gate Valve for high pressure applications. Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.

EBRO ARMATUREN HG Knife Gate Valves A bi-directional tight Knife Gate Valve with a through-going plate. Stafsjö’s knife gate valves HG have excellent flow characteristics and gives a bi-directional tight sealing.

EBRO ARMATUREN XV Knife Gate Valves Knife Gate Valve Stafsjö’s knife gate valve XV gives a secure and tight shut-off, independent of pressure direction. The valve has good flow characteristics and can be used in applications with pulp, biomass and sludge, and the Polyurethane seated version further extend its field of applications to abrasive media.

EBRO ARMATUREN MV Knife Gate Valves Universally applicable Knife Gate Valve. Stafsjö’s knife gate valve MV is used within many different fields of applications. The valve has a gate with a bevel edge that effectively cuts through different media. In closed position the gate is pushed onto the seat which gives a tight and reliable sealing. This special shut-off technique makes the MV valve suitable for both fluids and dry media such as pulp, sludge, biomass, powder and different kinds of waste.

EBRO ARMATUREN WB 14E Knife Gate Valves Stainless Steel Lug Type Knife Gate Valve. Stafsjö’s WB14E knife gate valve is a high performance shut-off valve with superior flow characteristics, offering bi-directional zero leakage shut-off up to 150 psi/10 bar. It is suitable for media such as pulp stock, chemicals, sludge, bio mass, slurry and water. The fully lugged body design is suitable for dead-end services.

EBRO ARMATUREN WB 14 Knife Gate Valves Lug Type Knife Gate Valve for water applications. These valves are all bi-directional and can therefore be installed into pipe systems independent of pressure direction. Full bore and excellent flow characteristics makes them suitable for fluids, sludge and liquids with solids in suspensions such as water, sewage and bio mass.

EBRO ARMATUREN WB 12 Knife Gate Valves Knife Gate Valve These valves are all bi-directional and can therefore be installed into pipe systems independent of pressure direction. Full bore and excellent flow characteristics makes them suitable for fluids, sludge and liquids with solids in suspensions such as water, sewage and bio mass.

EBRO ARMATUREN WB / WB 11 Knife Gate Valves Knife Gate Valves Wafe Type Knife Gate valve for water applications.